PEEK Rohre

HPLC-Zubehör

INFO:	Rohre, Kapillaren
All of the PEEK tubing is extruded from virgin PEEK made by Victrex, the original manufacturer of PEEK material. We do not add any additives to the original PEEK material, except for color particles in the solid colored tubing. Striped colored tubing consists of natural PEEK tubing where a stripe will be added to the outside of the tubing after extrusion. We always recommend using striped or natural tubing, because PEEK is not stable to all chemicals. Some solvents may react with the PEEK wall material and dissolve the color particles. Be aware of the limitations of PEEK material concerning solvents, temperature and pressure. If you are unsure, please get advise before using PEEK tubing.	Ultra-T (extra geringe Toleranz) +/- 0,025 mm ID und OD
	doppelt gestreift
	Kat.-Nr.	Beschreibung	Druck (bar/psi)
	41.159.006.90 41.159.013.91 41.159.018.92 41.159.025.93	Tubing, PEEK, 1/16” OD x 0.064 mm ID, natural Tubing, PEEK, 1/16” OD x 0.13 mm ID, red Tubing, PEEK, 1/16” OD x 0.18 mm ID, yellow Tubing, PEEK, 1/16” OD x 0.25 mm ID, blue	435 / 6300 420 / 6100 400 / 5800 385 / 5600

	Standard-Toleranz +/ - 0,05mm ID und OD
	einfach gestreift
	Kat.-Nr.	Beschreibung	Druck (bar/psi)
	41.159.013.01 41.159.018.02 41.159.025.03 41.159.050.04 41.159.075.05 41.159.100.06 41.159.140.07	Tubing, PEEK, 1/16” OD x 0.13 mm ID, red Tubing, PEEK, 1/16” OD x 0.18 mm ID, yellow Tubing, PEEK, 1/16” OD x 0.25 mm ID, blue Tubing, PEEK, 1/16” OD x 0.50 mm ID, orange Tubing, PEEK, 1/16” OD x 0.75 mm ID, green Tubing, PEEK, 1/16” OD x 1.0 mm ID, grey Tubing, PEEK, 1/16” OD x 1.4 mm ID, black	420 / 6100 400 / 5800 385 / 5600 350 / 4500 240 / 3500 165 / 2400 50 / 750

	naturfarben
	Kat.-Nr.	Beschreibung	Druck (bar/psi)
	41.036.007.00 41.079.013.00 41.079.018.00 41.079.025.00 41.318.075.00 41.318.159.00 41.318.200.00 41.635.318.00	Tubing, PEEK, 360 µm OD x 75 µm ID Tubing, PEEK, 1/32” OD x 0.13 mm ID Tubing, PEEK, 1/32” OD x 0.18 mm ID Tubing, PEEK, 1/32” OD x 0.25 mm ID Tubing, PEEK, 1/8” OD x 0.75 mm ID Tubing, PEEK, 1/8” OD x 1/16” ID Tubing, PEEK, 1/8” OD x 2.0 mm ID Tubing, PEEK, 1/4” OD x 1/8” ID	355 / 5200 380 / 5500 350 / 5100 310 / 4500 345 / 5000 220 / 3200 165 / 2400 225 / 3300

	einfarbig
	Kat.-Nr.	Beschreibung	Druck (bar/psi)
	41.159.013.51 41.159.018.52 41.159.025.53 41.159.050.54 41.159.075.55	Tubing, PEEK, 1/16” OD x 0.13 mm ID, red Tubing, PEEK, 1/16” OD x 0.18 mm ID, yellow Tubing, PEEK, 1/16” OD x 0.25 mm ID, blue Tubing, PEEK, 1/16” OD x 0.50 mm ID, orange Tubing, PEEK, 1/16” OD x 0.75 mm ID, green	420 / 6100 400 / 5800 385 / 5600 350 / 4500 240 / 3500

	Note: The data collected in column ’Pressure’ show the recommended permanent maximum working pressure at room temperature for non-destructive solvents. Change of solvents and temperature may result in lowered mechanical stability. Keep in mind that tight bends of the tubing, use of wrong tools for cutting and bad connections may result in mechanical damage to the tube and by this reduce the pressure stability.