HPLC Werkzeuge

INFO:

Schneidewerkzeug für Polymer-Rohre

When working with tubing it is the most important to have careful cut tube ends. This is imperative for making a good connection. To achieve a perpendicular cut, we suggest you use our Clean-Cut tubing cutter. We recommend to change the blade on a regular basis in order to have a sharp cutting blade, which will provide you with the best cut available.

Kat.-Nr.

Beschreibung

70.0020.001

70.0020.002

70.0010.001

70.0010.002

Tool, Guillotine Cutter for polymer tubing

Tool, replacement blade for 70.0020.001

Tool, Clean-Cut Tubing Cutter

         (delivered in plastic case with 1 spare blade)

Tool, replacement blade for 70.0020.001

INFO:

Schneidewerkzeug für SS-Rohre

Cutting metal tubing is one of the most difficult tasks in chromatography. We recommend for critical connections to use our precut stainless steel tubing. The tools offered, will give you a satisfactory cut of metal tubing which can be used in non-critical connections. Cutting tools offered are not ment to cut the metal tubing all the way, but to score the tube in order to break it. This way you will not close the inner diameter of the tube. Use our file for cleaning of the tube.

Kat.-Nr.

Beschreibung

70.0050.001

70.0030.001

70.0030.002

Tool, Tubing Plier for metal tubing

Tool, tubing cutter for metal tubing

Tool, replacement cutting wheel for 70.0030.001

INFO:

Schneidewerkzeug für Silica-Rohre

Silica tubing is not cut, but scored to break. Use the Tungsten Carbide knife to score your fused silica tube easy and convenient.

Kat.-Nr.

Beschreibung

70.0070.001

70.0070.002

Tool, Tungsten Carbide Glass Knife

Tool, Tungsten Carbide Glass Knife, replacement blade

INFO:

Rohr-Halterung

To keep your tubing in place is not always easy. This is why we recommends tube holders. The tubing knees will give you the right bend of your PEEK tubing, preventing close diameters, which do have a negative effect on the mechanical stability of your PEEK tubing.

The tubing holder will hold the tubing in the beaker and bottle. You will be surprised to see how the tube holder makes your lab-life easier. For use with 1/16” or 1/8” tubing.

Kat.-Nr.

Beschreibung

74.0010.090

74.0010.180

74.0001.001

Tool, Tubing knee 90°

Tool, Tubing knee 180°

Tool, tubing holder

Standard HPLC Werkzeuge

Kat.-Nr.

Beschreibung

71.375.434.01

71.250.312.01

71.803.01

71.802.01

71.806.01

71.819.01

71.0080.01

Tool, open wrench 3/8” x 7/16”

Tool, open wrench 1/4 x 5/16”

Tool, Pincers

Tool, file

Tool, tweezers

Tool, drill set incl. holder

Tool, Valvetool